Am I Backwards?

Who ever said you have to make your blocks first, then you borders?  Can you make you borders first?  Then make your blocks?  Yes, you can and I mostly do.  Since most of my quilts seem to have 7 or 8 borders, I often make the borders first.  I’ll lay the outermost top and bottom borders down first, then the side borders . . say that’s border #7.  Then I’ll put the top and bottom borders for the 6th border down and keep going in order so that the sides for the first border are on top.  I can pick them off, sew them on, then pick up the next ones, sew them on and not have to deal with making borders when I’m near the near the end of the quilt and already wanting to start another quilt.

The quilt I’m working on is set on point.  The center blocks are not difficult blocks but instead of using plain setting side and corner triangles, these are pieced and I wasn’t sure how easy they were going to be so I did them all first.

DSC08221

Looks kinda like a jigsaw puzzle, huh?  Don’t you always work the edges of the puzzle first?  That’s what I thought . . I’m not backwards after all!  :)

sig

Making Perfect Blocks

First, I’m adding the border posts to the side bar under “Free Patterns & Projects”.  Once I’ve covered all the topics I’m going to cover, I’ll post several charts that can be printed.

I’m not saying my blocks are perfect (they’re usually NOT!)  but I do know how to get real close to perfect.  Do you realize that being off just 1/16th of an inch can make a big difference?  Say you have a nine patch block that’s supposed to measure 9″ finished.  With two seams, each of those seams having two pieces of fabric, if either your seam allowance or your cutting is off by even 1/16th of an inch .. that’s 4/16th (or 1/4″) for your seam problems and another 1/4″ for any small cutting errors.  That’s 1/2″!  Add another 2/16″ for the two edges that might have a cutting problem but no seam!  Just a very, very small error can lead to over 1/4″ error in a simple 9 patch block.  Think of blocks that have 8 or 10 or 12 pieces across the width of the block!  Just a little bit of error compounds itself.

Here are some tips if you’re having problems with your blocks being the size you need for them to be.

  1. Be sure you’re cutting accurately.  Check your rulers.  After time, I’ve found that some of the edges just wear away.  If you feel you’re not getting accurate cuts, take some scrap fabric and use several different rulers to cut squares — make them all the same measurement but use different rulers.  Stack those squares on top of each other.  Are they all exactly the same?  If not, either you have a ruler that’s off or you’re not being careful enough with your cutting.
  2. Make sure you’re getting a perfect 1/4″ seam.  Cut two squares that are 2″.  Make sure they’re exactly perfect.  Sew them together, using a 1/4″ seam.  Press and measure.  This little practice piece should now measure 3-1/2″.  Does it?  If not, try different methods for getting that perfect 1/4″ seam allowance til you get it right.  Not all 1/4″ feet are created equally.  If you have a problem, it can be as simple as where your needle is hitting the fabric.  Maybe the position of your needle is off by just a teeny bit but it adds up.  Figure out what’s right for your machine!
  3. Be careful when you press.  I find that some fabrics tend to stretch and distort more so than others.  Fabrics vary from one brand to another and even different fabrics from one company can vary in weight and “stretchability”.  Using something like Mary Ellen’s Best Press can help; steam or not steam is a personal preference.
  4. Thread can make a difference.  Think that every seam has 2 layers of thread.  If you’re using a thicker thread like Star Cotton, which is “size 50″, which must be a “TEX weight”, it’s going to result in more bulk than using something finer like Aurifil or Superior Master Piece.  There’s a great article on thread weight at Superior’s site. Thread can make a big difference when you have star points coming together where there are lots of seams in one spot.

If you’re having problems getting your blocks close to perfect, make a few simple blocks and change whatever you can until you get it right.  You can get very close to perfect if that’s your goal.  While I don’t worry a whole lot about getting my blocks perfect, if I want my sashing to fit and my pieced borders to fit, then it is important to get as close to perfect as I can.

And, while we’re on the subject of perfect, quilting is supposed to be fun.   If quilting is stressful for you, something just isn’t right!  Just take the time to figure out what’s causing your stress and resolve it.  Wasn’t that easy?  No more stress! :)   One thing I always tell those in my classes — this isn’t brain surgery.  If you mess up in your quilting process, no matter how badly you mess up, no one is going to die!  No one is going to be permanently disabled or scarred for life.  It’s fabric!  Yes, it’s expensive and yes, you may be 90% finished with a top and you may ruin enough that you can’t finish the quilt as intended.  There’s always something you can do to salvage it.  Make it smaller, try to find more fabric, improvise and use a different fabric but do not stress about quilting!  We have enough in life to stress about . . let quilting be your de-stresser (is that a word).

sig

Projects Are Taking Over

Projects are usually stored in the rectangular plastic cake carriers but they’re all full!  In addition, the design wall had pieces of five different quilt, another one was started yesterday and there’s a quilt on the longarm that has a very near deadline.  I truly feel like I’m running in circles!    The quilt I started today is for an upcoming workshop.  I gave away the sample I had been using.  Why did I do that?

Got the pieces all cut out and tossed them in a cardboard box, along with the instructions.
dsc_1046
Stuck the extra fabric in the box too.  I know me . . I’ll use it in another project and first thing you know, I won’t have it if I should need extra!

dsc_1047

Then Chad mentioned that it would be nice to give a quilt to his best friend who is getting married.  Sure . . when is the wedding?  June 7! I showed him a couple of quilts I have here that might work but . . no, none of those will work.  I truly don’t think I can get a quilt done by June 7 but that doesn’t mean I won’t give it my best shot.

I hope to quilt on the longarm til noon and then spend the afternoon piecing.

sig